EZ-Deflator Operating Instructions
- With valve core remover pulled back, screw the unit onto the valve stem.
- Push the slide collar forward (toward the valve stem) to prevent air loss as the valve core is removed.
- Push the valve core remover forward and turn counter clockwise to unscrew the valve core.
Pull valve core remover back to retract valve core for deflation.
- Gauge now shows tire pressure and unit is ready to deflate the tire.
- Pull slide collar backward to quickly bleed air from the tire.
NOTE: Tire gauge does NOT show actual tire pressure while deflating.
- Push slide collar forward to stop air flow and check tire pressure.
Repeat steps 5&6 until pressure is at desired inflation level.
- Push valve core remover forward and turn clockwise to screw in valve core.
NOTE: Do not over tighten valve core.
- Unscrew the unit from the valve stem.
| 
){kind=link}